引用本文:孙发民,李欣,吕倩,王红梅,李海岩. 化工原料型加氢裂化催化剂的开发及其性能评价[J]. 石油与天然气化工, 2012, 41(4): 378-380,385,448,449.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2192次   下载 29 本文二维码信息
码上扫一扫!
分享到: 微信 更多
化工原料型加氢裂化催化剂的开发及其性能评价
孙发民1, 李欣1, 吕倩1, 王红梅2, 李海岩1
1.中国石油大庆化工研究中心;2.中国石油湖南销售分公司
摘要:
以小晶粒USY为催化剂的主要载体组分,以Mo-Ni为加氢成分,进行了化工原料型加氢裂化催化剂的开发。200mL一段串联加氢装置评价结果表明,在控制原料>177℃馏分油60%(φ)转化率的条件下,C5+液收97.2%,加氢裂化生成油中化工原料馏分的总收率为70.62%(w)。重石脑油芳潜为40.7%(w),是良好的重整进料;尾油BMCI值为6.1,是优质的乙烯裂解原料。
关键词:  加氢裂化  催化剂  小晶粒USY  化工原料
DOI:
分类号:TE624.91
基金项目:中国石油天然气股份有限公司科学研究与技术开发项目“化工原料型加氢裂化催化剂的开发及其性能评价”(2008B-3203-01)
Development and performance evaluation of hydrocracking catalyst of chemical material type
Sun Famin,Li Xin,Lv Qian,Wang Hongmei,Li Haiyan
Daqing Center of PetroChina Research Institute of Petrochemistry,Daqing 163714,Heilongjiang,China
Abstract:
A kind of Mo-Ni hydrocracking catalyst of chemical material type is developed using small crystal USY as supports.The test results of the catalyst evaluated on a 200 mL single-stage hydrocracking unit show that C+5 liquid yield is 97.2 wt%,chemical product yield is 70.62 wt%,under the conditions that the material temperature is more than 177 ℃ and the conversion of distillate oil is 60 φ%.Meanwhile,the heavy naphtha with high aromatic potentiality of 40.7 wt% is excellent reforming feedstock,and the tail oil with low BMCI value of 6.1 is superior ethylene cracking feedstock.
Key words:  hydrocracking  catalyst  small crystal USY  chemical material